Spring Maintenance Checklist

Gutters and downspouts: Pull leaves and debris from gutters and downspouts. Reattach gutters that have pelled away from the house. Run a hose on the roof and check for proper drain. If leaks exist, dry the area and use caulking or epoxy to seal the leak.

Siding: Clean siding with a pressure washer to keep mold from growing. Check all wood surfaces for weathering and paint failure. If wood is showing through, sand the immediate area and apply a primer coat before painting. If paint is peeling, scrape loose paint and sand smooth before painting.

Exterior caulking: Inspect caulking and replace if deteriorating. Scrape out all of the eroding caulk and recaulk needed area.

Window sills, door sills, and thresholds: Fill cracks, caulk edges, repaint or replace if necessary.

Window and door screens: Clean screening and check for holes. If holes are bigger than a quarter, that is plenty of room for bugs to climb in. Patch holes or replace the screen. Save bad screen to patch holes next year. Tighten or repair any loose or damaged frames and repaint. Replace broken, worn, or missing hardware. Wind can ruin screens and frames if they are allowed flap and move so make sure they are securely fastened. Tighten and lubricate door hinges and closers.

Drain waste and vent system: Flush out system.

Hot water heater: Lubricate circulating pump and motor

Evaporative air conditioner: Clean unit, check belt tension and adjust if needed. Replace cracked or worn belt.

Heat pump: Lubricate blower motor.

Foundation: Check foundation walls, floors, concrete, and masonry for cracking, heaving, or deterioration. If a significant number of bricks are losing their mortar, call a professional. If you can slide a nickel into a crack in your concrete floor, slab or foundation call a professional immediately.

Roof: Inspect roof surface flashing, eaves, and soffits. Check flashings around all surface projections and sidewalls.

Deck and porches: Check all decks, patios, porches, stairs, and railings for loose members and deterioration. Open decks and wood wings need to be treated every 4-6 years, depending on how much exposure they get to sun and rain. If the stain does not look like it should or water has turned some of the wood a dark gray, hire a professional to treat your deck and fence.

Landscape: This is a natural for spring home maintenance. Cut back and trim all vegetation and overgrown bushhes from structures. Limbs and leaves can cut into your home's paint and force you to have that side of the house repaired. A little trimming can save a lot of money and time.

Sprinklers: Check lawn sprinkler system for leaky valves, exposed lines, and improperly working sprinkler heads. If there is an area of ​​your yard that collects too much water or does not get enough, run the sprinklers to figure out the problem. If it's not something you can fix yourself, call a professional before your lawn needs the water.

All You Need To Know About FOB

FOB is an important term related to the shipping of goods. It stands for “freight on board” or “free on board” indicating the designation when the ownership or liability of goods gets transferred from the seller to the buyer. The term FOB is often confusing for many in the shipping industry. However, it is crucial that both sellers and buyers must understand the proper FOB definition and scope so that they do not end up in losing dollars. This term determines the responsibility of the party for bearing the charges of freight and also decides the point of time when the shipment is passed over from the sellers to the buyers.

For instance, in case of international shipping, FOB indicates that the consignor is going to bear the loading cost and the transportation cost for sending the goods to the port. The consignee bears expenses related to insurance, ocean freight, unloading and the transportation cost of the goods from the port to the actual destination. The seller in this situation passes over the risk of the goods to the buyer when there is the loading of goods at the port for shipment.

Difference Between Origin And Destination:

FOB origin indicates that the ownership of the goods is transferred as soon as in gets out of the hands of the seller. If shipping of the goods is required then it is the buyer’s responsibility and he or she has to bear the expenses. This type of transaction is often referred to the city name like FOB Boston, FOB San Francisco, etc.

FOB destination, on the other hand, indicates that ownership of goods is transferred to the buyer when the original products reach the doorstep of the buyer. Here, the seller has to arrange for the transportation of the goods for which either he pays or charges the buyer for the expenses. The seller also has to be liable in case the goods suffer any damage while en route.

FOB comes more into the picture when there are wholesale or B2B shipments of large goods.

Use Of FOB In The Shipping Documents:

There are four ways in which the FOB term is included in the documents for shipping:

  • FOB (place of origin)- Freight Collect
  • FOB (place of origin)- Freight Prepaid
  • FOB (place of destination)- Freight Collect
  • FOB (place of destination)- Freight Prepaid

It is important that the shippers understand the FOB designations well especially in case of damages to the goods. Some of the receiving docks totally deny the delivery of the damaged goods without accepting the damage notation. However, when a shipment is designated properly, it is clear that the damage risk has to be borne by the seller or the buyer. In such cases, there is no question of confusion. Moreover, the Incoterm 2010 has also amended the definition of FOB which has made the sale contracts simpler and understandable by all.

Why Does FOB Matter?

The term is particularly important for those companies who are engaged in shipping huge quantities of goods. A clear concept of the FOB term helps in understanding the liability of the party regarding the safety in the delivery of the shipment. It also helps the buyer and the seller in knowing which party owns the materials at a particular point of the shipping cycle. This information is also helpful for the accountants who can maintain instant records of the transactions on the basis of FOB. Moreover, the term is also useful in proper logistics management.

Sales Tax And FOB:

If you are falling in the nexus of any state which charges selling taxes on shipment, then FOB can be your friend. For the packages which have FOB origin marked on them, the buyer pays the freight charges directly by contracting with a shipper. Thus, the seller has no role here. The buyer does not have to bear sales taxes as he has already paid the freight charges which most of the states consider exempted.

When people find the term quite complex to understand and interpret, they often take the help of professionals who are expert in the field. This ensures that you comply with the terms without any faults and the shipments get managed quite fast. FOB incoterms is another interesting aspect which the shipping industry must pay attention to and know about in details.

7 Best Tips For Healthy Clay Pot Cooking

Clay pot cooking is the oldest and time-tested method for healthy cooking. While people are struggling to fight the ill effects of modern ways of cooking, with this safe and simple way of cooking, nobody ever had complaints. This is probably the reason people are slowly going back to their roots by switching to clay cookware.

There is a new challenge with clay pot cooking today it is rare that people are making it with the health value in mind so the clay pots available in the market are unfortunately chemical laden and coated with toxic enamels and glazes (like ceramics). The more beautiful and colorful they look on the outside, the more toxins they may leach while cooking. The cheaper they are, it’s possible that additives are used to make them faster and smoother. It’s important that you choose a truly healthy pot and here are 7 tips to choosing and using the best clay pots:

1. Always Choose Primary Clay

Primary clay is the purest form of clay – it has absolutely no toxins. Only primary clay is naturally inert, so doesn’t react to food like metals and ceramics. There are many clay pots available in the market that are made from secondary or tertiary clay but they have contaminants that may leach into your food while cooking.

2. No Chemicals, Glazes or Enamels

Most makers start using chemicals to make the process easier. In fact, every mechanized process needs the raw material to be treated with chemicals. The glazes and enamels might make your clay pots and pans colorful, attractive and even robust but they contaminate food. So always choose a cookware made from unglazed primary clay (or pure clay).

3. Seasoning Is Important

Seasoning your pure clay pot as per instructions is very important for cooking delicious food every time and it also increases the life of your pot. Pure clay is naturally non-stick, so after proper seasoning, if done right, the food should never stick to the bottom.

4. Choose Ingredients Carefully

You have finally chosen the healthiest clay pot – great, but it will all be in vain if you won’t use the right ingredients. For healthy clay pot cooking, make sure you choose all-natural organic ingredients that are unprocessed and nutrition-rich. A balanced diet is all you and your family needs for a healthy body, so always pay attention to the nutritional value of your ingredients.

5. Cook At Medium to Low Heat

Pure clay pots are great retainers of heat and the near infrared heat radiating from their walls cooks food evenly with gentle heat. It keeps nutrients intact and food cooks in almost the same time at low-medium heat as it does on high heat in metal/ceramic cookware.

Cooking at low-medium heat not only prevents food from burning and sticking to the bottom, it also improves the durability of your pure clay pot.

6. Choose A Pot That Manages Steam Well

Steam management is an important aspect of healthy cooking. In conventional cookware, the steam pressure inside the pot gets too much while cooking with harsh, near-infrared heat from metals/ceramics. So their lids have vents to release excessive steam in order to protect the pot from exploding.

Not many are aware that steam is water-soluble nutrients. As the body can’t store them like fat-soluble nutrients, they are needed every day. If the steam is released freely while cooking, the food becomes nutritionally deficient.

An ergonomically designed pure clay pot and lid make sure when steam rises from food, condenses at the inner surface of the lid (the lid being cooler than the pot) and settles back into the food before cooking is complete. This way, the water-soluble nutrients are preserved and your body is nourished with them regularly.

7. Clean With Water – No Soap

Regardless of what the label says, all soaps are toxic. When you are using a 100% non-toxic cookware, it’s important that you keep it away from anything toxic or chemical laden. Pure clay pots are naturally porous, so food doesn’t stick to the surface. You can always clean them with bare hands in normal water. Though you can scrub it a little if burnt food sticks at the bottom.

By following these simple yet useful tips, you can do wonders with healthy clay pot cooking. This will not only keep your body nourished with essential nutrients but will also protect you from common infections and diseases by strengthening your immunity.

Mountain Biking Clothes – Riding In Style

Clothes make the man, and the woman, and the mountain biker. Looking good on the trails is almost as great a concern among mountain bikes enthusiasts as having the best biking and safety equipment they can possibly afford. Mountain biking clothing, in fact, can take a significant chunk out of a biker's budget; having new designer biking togs to show off at the next big group trail ride is almost as much fun as being on the ride itself.

The mountain biking clothes which correlate to Ralph Lauren Weekend in main fashion are those of Zoic. Zoic combines color, innovative design, and unparallel craftsmanship in mountain cycling clothing lines for men, women, and children of every level of mountain cycling skill. They have comfortable shirts and shorts to appeal to all.

Zoic Mountain Biking Apparel

The Zoic Libertee Shirt for Men is extremely popular both for its comfort and the quality of its construction. The design of the Libertee sends a clear signal that its wearer knows great mountain cycling clothing when he sees it.

Zoic's El Diablo Jersey is a men's shirt constructed from fabric ideal for long distance tiding. Its cutting-edge design separates it from traditional mountain biking shirts, with an easy zipping mechanism to provide extra comfort while maintaining the high fashion look which has made Zoic mountain biking clothes [http://www.mountainbikingreviews.com/Freeride_Mountain_Biking/] the leaders among the sport's enthusiasts.

The Zoic Epoch Short is a men's short with a twin zipper to supply comfort with extra support and ventilation.

The Zoic Ether Short for Men, a highest quality nylon short, allows its wearers maximum freedom to move and, therefore, maximum comfort. It offers the convenience of side pockets in which the biker can stow all his biking accessories

The Zoic Crosswind Sleeveless Shirt is a piece of mountain cycling clothing that allows women mountain bikers to emphasize their femininity and remain cool by going sleeveless as they ride.

Finally, the Zoic Bellis for Women is the perfect mountain clothing for women who are competitive mountain bikers. It's constructed of a jersey fabric which offers both the comfortable functionality and good looks that make its wearers feel good init and good about themselves for wearing it!